| IP Telephony | |
|---|---|
| VoIP Protocols | SRTP |
| Expansion / Connectivity | |
|---|---|
| Interfaces | WAN: 2 x Ethernet 1000 – SFP (mini-GBIC) ¦ WAN: 2 x Ethernet 1000 – RJ-45 |
| Expansion Slots | 1 (total) / 1 (free) x NIM ¦ 1 (total) / 1 (free) x Pluggable Interface Module (PIM) |
| Installed Modules Qty (Max) | 0 (installed) / 2 (max) |
| Power | |
|---|---|
| Power Device | Internal power supply – 100 Watt |
| Installed Qty | 1 (max) |
| Voltage Required | AC 120/230 V (50/60 Hz) |
| Miscellaneous | |
|---|---|
| MTBF | 692,577 hours |
| Software / System Requirements | |
|---|---|
| OS Required | Cisco IOS XE 17.5.1 |
| Dimensions & Weight | |
|---|---|
| Width | 17.2 in |
| Depth | 11.8 in |
| Height | 1.7 in |
| Weight | 10.01 lbs |
5 – 85% (non-condensing)
| Environmental Parameters | |
|---|---|
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | |
|
C8200L-1N-4T Specification |
|
|---|---|
| General | |
| Device Type | Router |
| Enclosure Type | Rack-mountable – 1U |
| Connectivity Technology | Wired |
| Data Link Protocol | Gigabit Ethernet |
| Performance | SD-WAN IPsec throughput (1400Bytes, clear text): 500 Mbps ¦ SD-WAN IPsec throughput (IMIX, clear text): 400 Mbps ¦ IPv4 forwarding throughput (1400-byte packet size): 3.8 Gbps ¦ IPsec throughput (1400Bytes, clear text): 500 Mbps |
| Capacity | SD-WAN overlay tunnels scale: 1500 ¦ IPsec SVTI tunnels: 1500 ¦ Access Control Entries (ACEs) per system (IPv4): 72000 ¦ IPv4 routes: 800000 ¦ IPv6 routes: 800000 ¦ Queues: 16000 ¦ NAT sessions: 600000 ¦ Firewall sessions: 512000 ¦ Virtual Routing and Forwarding (VRF) entries: 2000 ¦ ACLs per system: 4000 |
| Network / Transport Protocol | RSVP, NTP, IPSec, PPPoE, DHCP, DNS, L2TPv3, RTCP |
| Routing Protocol | OSPF, RIP, IS-IS, RIP-2, BGP, EIGRP, HSRP, DVMRP, VRRP, IGMPv3, GRE, OSPFv3, policy-based routing (PBR), MPLS, Bidirectional Forwarding Detection (BFD) |
| Remote Management Protocol | SNMP, SCP, OMP |
| Encryption Algorithm | DES, Triple DES, MD5, IKE, TLS, SHA-1, PKI, 128-bit AES, SHA-2, 1024-bit RSA, 2048-bit RSA, 256-bit SHA, 256-bit AES-GCM, 256-bit AES-CBC, 512-bit SHA, ESP, 748-bit RSA, 384-bit SHA, ECDSA 256-bit, ECDSA 384-bit, HMAC |
| Authentication Method | Secure Shell (SSH), RADIUS |
| Features | NAT support, PAT support, Syslog support, URL filtering, Class-Based Weighted Fair Queuing (CBWFQ), Weighted Random Early Detection (WRED), Access Control List (ACL) support, Quality of Service (QoS), DHCP server, Bidirectional Forwarding Detection (BFD), DHCP client, Forward Error Correction (FEC), Class of Service (CoS), Call Admission Control (CAC), Flexible NetFlow (FNF), Application Visibility and Control (AVC), Source-Specific Multicast (SSM), Authentication, Authorization and Accounting (AAA), Hierarchical Quality of Service (HQoS), Encapsulated Remote SPAN (ERSPAN), Embedded Event Manager (EEM), Protocol Independent Multicast (PIM), Ethernet Virtual Connections (EVC), Cisco IOS IP Service-Level Agreements (IPSLA), Network-Based Application Recognition (NBAR), Datagram Transport Layer Security (DTLS), Point-to-Point Protocol (PPP), High-Level Data Link Control (HDLC), Multilink Point-to-Point Protocol (MLPPP), Multilink Frame Relay (MLFR), Application Aware Routing (AAR), Interactive Voice Response (IVR), Service Advertisement Framework (SAF), Secure Unique Device Identification (SUDI) |
| Compliant Standards | IEEE 802.1Q, IEEE 802.3ah, IEEE 802.1ag, EN 61000-3-2, IEC 61000-3-2, EN55024, EN 61000-6-1, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, FDA, FCC CFR47 Part 15 A, CNS 13438 Class A, EN 300 386, KN35, IEC/EN 61000-4-3, IEC/EN 61000-4-4, IEC/EN 61000-4-5, IEC/EN 61000-4-6, IEC/EN 61000-4-8, AS/NZS CISPR 32 Class A, KN32 Class A, IEC/EN 61000-4-11, IEC/EN 61000-4-2, EN 55032, CISPR 32 Class A, VCCI-CISPR 32:2016 Class A, EN 55035, IEC/EN 61000-3-3, IEC/EN 60825, SIG, CAN/CSA C22.2 No. 60950-1 |
| Processor | Intel |
| RAM | 4 GB (installed) / 32 GB (max) |
| Flash Memory | 8 GB |
| Built-in Devices | 16 GB SSD |
|
Multicore processors |
● C8200-1N-4T uses an Intel ® x86 CPU with 8 GB memory default
● C8200L-1N-4T uses an Intel x86 CPU with 4 GB memory default
● High-performance multicore processors support high-speed WAN connections
● Dynamic core allocation architecture will repurpose unused cores into forwarding entities as per the user’s configuration
|
|
Embedded IPsec VPN hardware acceleration |
● C8200-1N-4T enables up to 1 Gbps IPsec traffic
● C8200L-1N-4T enables up to 500 Mbps IPsec traffic
● Increases scalability for IPsec throughput requirements
● SSL and crypto hardware acceleration
|
|
Integrated Gigabit Ethernet ports |
● Provides four built-in Ethernet WAN ports
● Two Ethernet ports are Small Form-Factor Pluggable (SFP) and two are RJ45 ports, enabling fiber as well as copper connectivity
|
|
DRAM |
● C8200-1N-4T ships with 8 GB DRAM
● C8200L-1N-4T ships with 4 GB DRAM
● Both models can be upgraded to 16 GB and 32 GB for higher scale and performance
|
|
Flash memory support |
● Both models have an integrated onboard 8-GB flash and are not upgradable. M.2 storage provides flash upgrade options
|
|
M.2 storage |
● The C8200-1N-4T is shipped with default 16G M.2 storage and can be upgraded to 32G M.2 USB and 600G M.2 Non-Volatile Memory Express (NVMe) Storage
● The C8200L-1N-4T has no default M.2 storage and can be upgraded to 16G, 32G USB and 600G M.2 Non-Volatile Memory Express (NVMe) Storage
|
|
Power supply |
● Both models use an internal, fixed AC power supply
● Power over Ethernet (PoE) is available as an option
● PoE ports added in the Network Interface Module (NIM) slot will require an additional external PoE power supply
|
|
Modularity and form factor |
● 1-Rack Unit (1RU) form factor
● Supports NIM and Pluggable Interface Module (PIM) slots
|
|
Integrated security |
● Hardware-anchored Secure Boot and Secure Unique Device Identification (SUDI) support for Plug and Play to verify the identity of the hardware and software
|
